F405-STD & FC-HUB VTX Bundle !

 

the coolest Combo for building a inav, Betaflight or Ardupilot based drone !

 

 

MCU: 168MHz STM32F405RGT6

 

  • IMU: 32K ICM20602 gyro/accelerometer (SPI)
  • Baro: BMP280 (I2C)
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • Built in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • SoftSerial on TX2, S5 or S6 optional
  • Camera control on S6 or DAC optional
  • Smartaudio & Tramp VTX protocol supported
  • Battery Voltage Sensor: 1:10
  • Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
  • BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
  • LDO 3.3V: Max.300mA
  • I2C1 SDA & SCL: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • 6x PWM / DShot outputs without conflict
  • 2x 2812LED outputs option
  • 5x UARTs
  • 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x pair I2C1 pads
  • 1x Side-press button for BOOT(DFU) mode
  • 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
  • 36x36mm PCB with 30.5mm mounting holes
  • w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
  • w/ 4pcs M3 Anti-vibration Standoffs

     

    works with: Ardupilot

 

FCHUB -VTX

 

Specifications & Features

  • Input voltage: 6~27V(2~6S LiPo)
  • PDB: 4*30A (4*46A, 5 seconds)
  • Current Sensor: 184A (Scale 179)
  • BEC Output: 5V/1A for Camera or FC
  • VTX: 40 standard 5.8G channels, A/B/E/F/R Band
  • VTX Output Power: 25, 200, 500mW switchable
  • Traditional button+LED control of frequency and power
  • BFCMS (BFOSD & LUA Script) control via FC UART _TX
  • Video signal & TX5 are ready on FFC connected with MATEK FC F405-OSD
  • Silicon wires connection with other brands FC
  • Firmware upgradeable
  • VTX Power Consumption: 3.1W Max. @ 500mW
  • Video Input Impedance: 75 Ohm
  • Audio Subcarrier Frequency: 6.5 MHz
  • RF Connector: MMCX
  • Video Format: NTSC/PAL
  • Weight: 14g (w/ MMCX whip antenna)
  • Size: 36*45*7mm w/30.5mm mounting

Included

  • FCHUB-VTX board
  • MMCX to SMA Female, RG178 cable 9cm
  • MMCX 5.8G whip antenna, RG178 8cm
  • Rubycon ZLH 35V/470uF Low ESR capacitor

MATEK SYSTEMS F405-STD - FC HUB-VTX

SKU: F405HUBVTX
€72.90 Regular Price
€65.90Sale Price

    ABOUT US

    CONTACT

    info@coptersquad.com

    Copter Squad UAS UG
    Greenpark - Haus 33
    14532 Stahnsdorf
    Germany

    mab@coptersquad.com

    Ph. +49 30 8010 9999

    • Facebook Social Icon
    • Twitter Social Icon
    • YouTube Social  Icon